Is Your Concrete Ready for Summer? Why Concrete Lifting Matters Before the Heat Hits

As Albertans shake off the last of the spring chill and turn their attention to summer landscaping, many start noticing cracks, dips and uneven slabs on their driveways, walkways and patios. These imperfections aren’t just an eyesore—they’re a safety risk, a drainage problem and a threat to your home’s long-term stability. At Fusion Foam, we’re here to tell you that concrete lifting is one of the smartest things you can do before the summer sun takes over. 

Spring and early summer are the ideal seasons to correct concrete issues because of the ground’s condition. After a winter of freeze-thaw cycles and a soggy spring thaw, the soil beneath your concrete slabs is often soft or destabilized. If left untreated, this compromised soil can worsen with heavy summer use. From family foot traffic to parked vehicles, those surfaces need to be safe, strong and level. 

Concrete lifting—also known as slab jacking or polyurethane concrete raising—is a fast, cost-effective and non-invasive solution for restoring your concrete’s original position. Instead of tearing out and replacing a slab, we drill small holes, inject high-density polyurethane foam beneath the surface, and watch as it gently raises and stabilizes the concrete in real time. It’s clean, quiet and ready for use the same day. 

Unlike traditional mud jacking, which uses heavier, water-based slurry, Fusion Foam’s modern lifting method resists moisture and won’t break down over time. This is especially important in Alberta’s variable climate, where water infiltration can lead to future sinking. Concrete lifting protects your investment and stops minor problems from becoming major ones. 

One of the biggest summer benefits of concrete lifting is water management. Uneven surfaces often cause water to pool around your foundation or flow toward your home instead of away from it. When heavy summer rains hit, these problem areas can lead to erosion, basement leaks or even flooding. By levelling your concrete now, you’re improving your yard’s drainage and protecting your home’s structure during peak storm season. 

Another advantage? Curb appeal. Uneven front steps and tilted slabs detract from your home’s visual appeal. Whether you’re planning to host backyard barbecues or thinking about selling your property, now’s the time to give your concrete a facelift. Lifting rather than replacing not only saves you time and money—it enhances the look of your home instantly. 

Repair and Raise Sunken Concrete with Concrete Lifting in Alberta 

If you’re unsure whether your concrete needs lifting, look for these signs: pooling water, cracks that appear to widen, trip hazards, visible sinking at joints or doors that don’t close properly due to shifting slabs. The earlier you catch the issue, the simpler the fix. 

Our team at Fusion Foam is proud to offer residential and commercial concrete levelling services throughout Alberta. We use only premium spray foam products designed for Canadian soil and climate, and our technicians are trained to spot underlying issues before they become expensive repairs. We also offer spray foam insulation and thermal corkshield to keep your property protected, efficient and resilient year-round. 

Whether it’s your driveway, garage floor, patio or shop entrance, we can raise it, level it and extend its life without the cost and disruption of demolition. Don’t wait for July heatwaves and summer storms to worsen your concrete problems. June is the perfect time to book your service and set your property up for success. 

Visit Fusion Foam’s concrete levelling page to learn more about our process and book your free estimate! 

Why VipeQ Thermal Corkshield is the Future of Eco-Friendly Home Protection

As homeowners across Alberta look for smarter, greener ways to protect their homes, VipeQ thermal corkshield is quickly gaining popularity. This innovative spray-on solution offers a sustainable, energy-saving alternative to traditional exterior finishes. At Fusion Foam, we believe it is one of the best investments you can make to shield your property from the elements while boosting its long-term value. 

Cork may seem like an unusual material for home protection, but it is actually a natural powerhouse. Sourced sustainably from cork oak trees, it is incredibly resilient, flexible and insulating. When applied as a spray, cork forms a durable, breathable coating that can significantly improve your home's energy efficiency and resilience. Unlike stucco or vinyl siding, VipeQ thermal corkshield moves with your house through the changing seasons, preventing cracks, warping and moisture damage. 

We know that protecting your home from Alberta’s harsh weather is a priority. From freeze-thaw cycles to blazing summer heat, your exterior must withstand a lot. Traditional cladding often breaks down over time, but cork’s cellular structure naturally resists temperature extremes, UV radiation and water infiltration. Studies from the National Renewable Energy Laboratory show that insulation materials with high flexibility and breathability, like cork-based sprays, can dramatically extend the life of a building envelope. 

Installing spray cork can also make a noticeable difference in your energy bills. Cork’s thermal properties keep heat inside during winter and reflect heat away during summer, reducing the load on your HVAC system. Homeowners are ten times more likely to see lower bills when they invest in better insulation and sealing. Over time, the energy savings can more than offset the installation cost, making it a smart financial move as well as an eco-friendly one. 

Another advantage of using thermal corkshield is its contribution to environmental sustainability. Cork harvesting does not harm the trees, and because the material is renewable and biodegradable, it has a smaller carbon footprint than synthetic finishes. Eco-conscious builders and homeowners are increasingly turning to cork solutions to meet green building standards and futureproof their properties. 

At Fusion Foam, we specialize in a variety of cutting-edge insulation and protection solutions, including VipeQ spray cork. We also offer high-performance spray foam insulation services ‘near me’ to help you achieve maximum energy savings across your entire home or commercial property. Whether you are looking to insulate your attic, garage or walls, or add exterior cork protection, we can tailor a solution that fits your goals and your budget. 

Ready to transform your home or building? Learn more about VipeQ Thermal Corkshield cost and how this natural technology can help you save energy, protect your investment and contribute to a healthier planet. Get in touch with our friendly team at Fusion Foam today to book a consultation or schedule your application service. We are proud to bring innovative, sustainable solutions to homeowners across Alberta and beyond. 

Choosing the Best Insulation for Pole Barn or Shop: Why Spray Foam Wins Every Time

When building or renovating a shop or pole barn in Alberta, choosing the right insulation is crucial. The right choice protects your investment, boosts energy efficiency and ensures a comfortable environment year-round. At Fusion Foam, we specialize in providing high-performance spray foam insulation for shops and pole barns, and we are here to help you make the best decision for your project. 

What Insulation is Best for a Shop? 

Spray foam insulation is considered the best option for shops because it offers an unbeatable combination of air sealing, R-value and moisture resistance. Unlike traditional fibreglass batts, spray foam adheres to surfaces, sealing cracks and gaps that could allow drafts and pests. With its high R-value per inch, spray foam delivers superior performance without the bulky thickness of other materials. 

What is the Cheapest Way to Insulate a Small Shop? 

If budget is a top priority, blown-in insulation may be the most cost-effective solution. However, while the initial investment is lower, it does not provide the same level of air sealing or longevity as spray foam insulation. When considering lifetime value, spray foam often ends up being more economical because it dramatically reduces heating and cooling costs over time.  

What Kind of Insulation do Commercial Buildings Use? 

Commercial buildings typically use spray foam, rigid foam board or fibreglass insulation depending on the structure's needs. For shops and barns, spray foam is preferred due to its ability to resist moisture, reduce energy loss and improve structural strength. In metal or pole barn structures, spray foam also helps prevent condensation issues that can otherwise lead to rust and deterioration. 

What is the Best R-Value for a Pole Barn? 

The best R-value for a pole barn depends on its use. For general storage, an R-value of R-13 to R-19 is often sufficient. If you plan to heat or cool the space regularly, aim for R-30 or higher in walls and R-38 to R-49 in the roof. Closed-cell spray foam insulation achieves an impressive R-6 to R-7 per inch, meaning you can reach high R-values without requiring extremely thick walls. 

Do I Need a Vapour Barrier in My Pole Barn Walls? 

Yes, especially in Alberta’s variable climate, a vapour barrier is essential to prevent moisture buildup inside walls. Fortunately, closed-cell spray foam acts as its own vapour barrier once applied at the correct thickness. This eliminates the need for separate barriers, reducing labour and material costs while simplifying your construction process. 

What is the Highest R-Value for 2x4 Construction? 

Traditional fibreglass batts can only achieve about R-13 to R-15 in a 2x4 wall cavity. With closed-cell spray foam insulation, you can reach R-20 to R-24 in the same space. This performance makes spray foam the ideal choice for tight framing, where achieving maximum insulation value is critical. 

Is Spray Foam Better Than Foam Board for a Pole Barn? 

While foam board insulation offers good R-values, it requires meticulous installation to prevent air leaks. Spray foam insulation, on the other hand, fills every nook and cranny, eliminating air gaps completely. It also bonds tightly to metal, wood and concrete surfaces, making it highly durable and resistant to shifting over time. See how Fusion Foam's recent projects demonstrate the superior performance of spray foam. 

When you are ready to upgrade your shop, pole barn or commercial building, Fusion Foam has you covered.  

Choose Fusion Foam for Spray Foam Insulation Near Me! 

Book a consultation with us today and see why we are Peace River’s trusted installers of the best insulation for pole barns, shops and more! 

Why SPF Concrete Lifting is the Smart Solution for Concrete Repair and Levelling | Peace River Alberta

Concrete surfaces take a beating over time. Sidewalks, driveways, patios and warehouse floors can all settle, sink or crack due to moisture changes, shifting soil or simple wear and tear. When this happens, many property owners worry that the only answer is costly demolition and replacement. Thankfully, there is a faster, more affordable option: slab jacking. 

At Fusion Foam, we specialize in professional slab jacking services that restore your concrete surfaces quickly and efficiently. Slab jacking lifts and levels existing concrete slabs using high-density foam, saving you money and downtime compared to a full replacement. It is an ideal solution for residential, commercial and industrial projects alike. 

Slab jacking works by injecting expanding foam through small, strategic holes drilled in the concrete. The foam flows underneath the slab, filling voids and lifting the concrete back to its original position. This method is less invasive and much faster than traditional tear-out and pour methods, meaning you can often use your surface again within hours, not days. 

Learn more about Fusion Foam's concrete lifting and levelling services here! 

One of the biggest benefits of slab jacking is the minimal disruption it causes. Homeowners appreciate that landscaping, driveways and patios stay intact. Business owners benefit from reduced downtime for warehouses, storefronts and service areas. Foam slab jacking extends the life of existing materials rather than sending tonnes of concrete to the landfill. According to the National Renewable Energy Laboratory, using restoration techniques can significantly reduce construction waste and environmental impact. 

Slab Jacking in Peace Country Alberta 

Another advantage is the durability of polyurethane foam. Unlike mudjacking, which uses heavy, water-based grout that can erode over time, the foam used in slab jacking is waterproof, stable and designed to last for decades. This makes it an excellent investment for anyone seeking a long-term solution to uneven or sunken concrete. 

Spring and early summer are perfect times for slab jacking. As the ground thaws and settles, more issues become visible. Cracks widen, trip hazards appear and puddles form in driveways or walkways. Acting now prevents further damage and avoids more expensive repairs down the line. 

Choosing slab jacking also improves safety and accessibility. Uneven walkways are a leading cause of trips and falls, particularly for seniors and children. Driveways and garage floors with significant dips can cause vehicle damage or drainage issues. Slab jacking restores surfaces to their proper grade, enhancing both appearance and safety without the cost and inconvenience of replacement. 

When you are considering concrete repair, it is important to work with experienced professionals. Fusion Foam uses advanced foam technology and precise lifting techniques to ensure reliable, lasting results. We stand by our work and take pride in helping clients throughout the region protect and beautify their properties. 

Concrete problems do not get better with time. They get worse—and more expensive. Contact us today to learn how slab jacking can solve your sinking concrete issues quickly, affordably and with minimal disruption.  

Contact Fusion Foam for all your insulation, roof coatings and slab jacking needs in Peace River, Grimshaw, Berwin and the Peace Country region of Alberta! 

Call 780-835-1760 

office@fusionfoam.ca 

Web Contact Form 

What is slab jacking, and how does it work? 

Slab jacking, also known as polyjacking or foam lifting, is a concrete repair technique that involves injecting high-density polyurethane foam beneath a sunken concrete slab. The foam expands, filling voids and lifting the slab back to its original position. This method is less invasive and more cost-effective than full slab replacement.  

How long does the slab jacking process take? 

The duration depends on the size and complexity of the project. However, most residential slab jacking jobs are completed within a few hours. The repaired area is typically ready for use shortly after the process is finished.  

Is slab jacking a permanent solution? 

Yes, when performed correctly, slab jacking provides a long-lasting repair. The polyurethane foam used is durable and resistant to moisture, ensuring the stability of the lifted slab for many years.  

Will the injection holes be noticeable after the repair? 

The holes drilled for foam injection are relatively small, typically around 5/8 inch in diameter. After the process, these holes are filled and patched with a material that closely matches the existing concrete, making them only minimally visible.  

Can all types of concrete slabs be lifted using slab jacking? 

Most sunken concrete slabs can be effectively lifted using slab jacking. However, slabs that are severely cracked, crumbling, or have other structural issues may not be suitable candidates. A professional assessment is recommended to determine the best repair approach.  

How does slab jacking compare to traditional mudjacking? 

While both methods aim to lift sunken concrete, slab jacking uses lightweight polyurethane foam, resulting in smaller injection holes and a quicker curing time. In contrast, mudjacking utilizes a heavier cement-based mixture, which may require larger holes and longer curing periods.  

Understanding R-Value in Blown-In Cellulose and Spray Foam Insulation

When upgrading your home's insulation, one term that comes up often is R-value. This important rating measures how well insulation resists heat flow, and the higher the R-value, the better it performs. At Fusion Foam, we help homeowners maximize comfort and efficiency by offering top-tier blown-in insulation services that deliver impressive R-values tailored to your needs. 

Spray foam insulation is especially valuable for attics, walls and crawl spaces where gaps and irregular framing make traditional insulation tricky to install. Thanks to its ability to fill tight spaces with ease, spray foam creates a more complete thermal barrier. For Canadian homeowners facing long winters and humid summers, this translates into year-round savings and comfort. Choosing insulation with the right R-value for your region and home is essential—and that’s where our experience shines. 

Different types of insulation offer different R-values. For example, spray foam insulation generally delivers higher performance per inch, while blown-in cellulose or fibreglass used in conjunction with a good thermal barrier can still provide excellent thermal protection when installed properly. 

We often recommend spray foam insulation for attics and older homes, where retrofitting can be done with minimal disruption. In addition to boosting R-value, this method helps reduce air leakage and improve indoor air quality. The material conforms to any shape, allowing for full coverage and fewer thermal weak spots. It’s one of the most efficient and cost-effective ways to enhance home performance while keeping energy bills under control. 

Our team is committed to helping you understand how insulation impacts your home’s energy profile. From selecting the right material to determining the optimal thickness for your project, we make sure you get long-lasting results that align with local building codes and climate demands. 

Why Insulation R-Value Should Guide Your Next Upgrade 

R-value should be a top consideration when planning an insulation upgrade, especially in areas like Alberta where temperatures can swing dramatically between seasons. High R-value insulation like spray foam provides outstanding control over indoor temperatures, reducing the load on HVAC systems and lowering your carbon footprint. It’s an investment that pays for itself in reduced heating and cooling costs over time. 

That said, blown-in cellulose insulation is a fantastic option for many spaces, combining ease of installation with reliable thermal performance. At Fusion Foam, we assess your property’s unique layout and recommend a tailored solution that meets your budget and energy goals. Whether you're building a new home or renovating an older one, improving your R-value is a smart and sustainable step forward. 

Reach out to our team today to schedule a consultation and explore your insulation options. From blown-in insulation to spray foam systems, we’re here to help you make informed, confident choices for your home. A warmer winter, cooler summer and smaller utility bill are all within reach—with Fusion Foam and the right R-value insulation solution.